Comparison of No Tap (two-step) and tapping robotic assisted cortical bone trajectory screw insertion.

Workflow for cortical bone trajectory (CBT) screws includes tapping line-to-line or under tapping by 1 mm. We describe a non-tapping, two-step workflow for CBT screw placement, and compare the safety profile and time savings to the Tap (three-step) workflow. Patients undergoing robotic assisted 1-3 level posterior fusion with CBT screws for degenerative conditions were identified and separated into either a No-Tap or Tap workflow. Number of total screws, screw-related complications, estimated blood loss, operative time, robotic time, and return to the operating room were collected and analyzed. There were 91 cases (458 screws) in the No-Tap and 88 cases (466 screws) in the Tap groups, with no difference in demographics, revision status, ASA grade, approach, number of levels fused or diagnosis between cohorts. Total robotic time was lower in the No-Tap (26.7 min) versus the Tap group (30.3 min, p = 0.053). There was no difference in the number of malpositioned screws identified intraoperatively (10 vs 6, p = 0.427), screws converted to freehand (3 vs 3, p = 0.699), or screws abandoned (3 vs 2, p = 1.000). No pedicle/pars fracture or fixation failure was seen in the No-Tap cohort and one in the Tap cohort (p = 1.00). No patients in either cohort were returned to OR for malpositioned screws. This study showed that the No-Tap screw insertion workflow for robot-assisted CBT reduces robotic time without increasing complications.

[Comparison of Clinical Effects of Cortical Bone Trajectory Screws and Traditional Pedicle Screws in Posterior Lumbar Fusion]. / è °æ¤ŽåŽè·¯èžåˆæœ¯ä¸­çš®è´¨éª¨è½¨è¿¹èžºé’‰å’Œä¼ ç»Ÿæ¤Žå¼“æ ¹èžºé’‰çš„ä¸´åºŠæ•ˆæžœæ¯”è¾ƒ.

Objective: To compare the clinical effects of cortical bone trajectory screws and traditional pedicle screws in posterior lumbar fusion. Methods: A retrospective study was conducted to analyze lumbar degeneration patients who underwent surgical treatment at our hospital between January 2016 and January 2019. A total of 123 patients who met the inclusion criteria were enrolled. The subjects were divided into two groups according to their surgical procedures and the members of the two groups were matched by age, sex, and the number of fusion segments. There were 63 patients in the traditional pedicle screws (PS) group and 60 in the cortical bone trajectory screws (CBTS) group. The outcomes of the two groups were compared. The primary outcome measures were perioperative conditions, including operation duration, estimated intraoperative blood loss (EBL), and length-of-stay (LOS), visual analog scale (VAS) score, Oswestry Disability Index (ODI) score, and interbody fusion rate. The secondary outcome measures were the time to postoperative ambulation and the incidence of complications. VAS scores and ODI scores were assessed before operation, 1 week, 1 month, 3 months, and 12 months after operation, and at the final follow-up. The interbody fusion rate was assessed in 1 year and 2 years after the operation and at the final follow-up. Results: The CBTS group showed a reduction in operation duration ([142.8±13.1] min vs. [174.7±15.4] min, P<0.001), LOS ([9.5±1.5] d vs. [12.0±2.0] d, P<0.001), and EBL ([194.2±38.3] mL vs. [377.5±33.1] mL, P<0.001) in comparison with the PS group. The VAS score for back pain in the CBTS group was lower than that in the PS group at 1 week and 1 month after operation and the ODI score in the CBTS group was lower than that in the PS group at 1 month after operation, with the differences being statistically significant (P<0.05). At each postoperative time point, the VAS score for leg pain and the interbody fusion rate did not show significant difference between the two groups. The VAS score for back and leg pain and the ODI score at each time point after operation in both the CBTS group and the PS group were significantly lower than those before operation (P<0.05). No significant difference was found in the time to postoperative ambulation or the overall complication incidence between the two groups. Conclusion: The CBTS technique could significantly shorten the operation duration and LOS, reduce EBL, and achieve the same effect as the PS technique does in terms of intervertebral fusion rate, pain relief, functional improvement, and complication incidence in patients undergoing posterior lumbar fusion.

Risk Factors for Medial Breach During Robotic-Assisted Cortical Bone Trajectory Screw Insertion.

OBJECTIVE: We describe the incidence of, and identify the risk factors for, a medial breach of the pedicle wall during robotic-assisted cortical bone trajectory (RA-CBT) screw insertion. METHODS: We analyzed a consecutive series of adult patients who underwent RA-CBT screw placement from January 2019 to July 2022. To assess the pedicle wall medial breach, postoperative computed tomography (CT) images were analyzed. Patient demographic data and screw data were compared between patients with and without a medial breach. The Hounsfield units (HUs) on the L1 midvertebral axial CT scan was used to evaluate bone quality. RESULTS: Of 784 CBT screws in 145 patients, 30 (3.8%) had a medial breach in 23 patients (15.9%). One screw was grade 2, and the others were grade 1. Patients with a medial breach had a lower HU value compared with the patients without a medial breach (123.3 vs. 150.5; P = 0.027). A medial breach was more common in the right than left side (5.5% vs. 2.0%; P = 0.014). More than one half of the screws with a medial breach were found in the upper instrumented vertebra (UIV) compared with the middle construct or lowest instrumented vertebra (6.7% vs. 1.3% vs. 2.7%; P = 0.003). Binary logistic regression showed that low HU values, right-sided screw placement, and UIV were associated with a medial breach. No patients returned to the operating room for screw malposition. No differences were found in the clinical outcomes between patients with and without a medial breach. CONCLUSIONS: The incidence of pedicle wall medial breach was 3.8% of RA-CBT screws in the postoperative CT images. A low HU value measured in the L1 axial image, right-sided screw placement, and UIV were associated with an increased risk of medial breach for RA-CBT screw placement.

Biportal endoscopic-assisted cortical bone trajectory screw placement and lumbar interbody fusion.

BACKGROUND: Endoscopically assisted screw fixation with lumbar interbody fusion is rarely performed. We succeeded in implanting the cortical bone trajectory (CBT) screws under the guidance of unilateral biportal endoscopy (UBE). METHOD: We attempted endoscopically assisted screw fixation in a patient with degenerative spondylolisthesis. Through a third portal, ipsilateral CBT screws were implanted without complications. CONCLUSIONS: We successfully performed unilateral biportal endoscopic lumbar interbody fusion (ULIF) with CBT and reversed CBT screws. Compared with percutaneous pedicle screw (PPS) placement, this procedure is a minimally invasive, endoscopic alternative that allows precise screw placement.

Comparison of the clinical and radiographic outcomes of cortical bone trajectory and traditional trajectory pedicle screw fixation in transforaminal lumbar interbody fusion: a randomized controlled trial.

PURPOSE: To compare the clinical outcomes and radiographic outcomes of cortical bone trajectory (CBT) and traditional trajectory (TT) pedicle screw fixation in patients treated with single-level transforaminal lumbar interbody fusion (TLIF). METHODS: This trial included a total of 224 patients with lumbar spine disease who required single-level TLIF surgery. Patients were randomly assigned to the CBT and TT groups at a 1:1 ratio. Demographics and clinical and radiographic data were collected to evaluate the efficacy and safety of CBT and TT screw fixation in TLIF. RESULTS: The baseline characteristic data were similar between the CBT and TT groups. Back and leg pain for both the CBT and TT groups improved significantly from baseline to 24 months postoperatively. The CBT group experienced less pain than the TT group at one week postoperatively. The postoperative radiographic results showed that the accuracy of screw placement was significantly increased in the CBT group compared with the TT group (P < 0.05). The CBT group had a significantly lower rate of FJV than the TT group (P < 0.05). In addition, the rate of fusion and the rate of screw loosening were similar between the CBT and TT groups according to screw loosening criteria. CONCLUSION: This prospective, randomized controlled analysis suggests that clinical outcomes and radiographic characteristics, including fusion rates and caudal screw loosening rates, were comparable between CBT and TT screw fixation. Compared with the TT group, the CBT group showed advantages in the accuracy of screw placement and the FJV rate. CLINICAL TRIALS REGISTRATION: This trial has been registered at the US National Institutes of Health Clinical Trials Registry: NCT03105167.

Biomechanical evaluation of modified and traditional cortical bone trajectory technique on adjacent segment degeneration in transforaminal lumbar interbody fusion-finite element analysis.

OBJECTIVES: Modified cortical bone trajectory (MCBT) technique was proposed by our team in previous studies, but its biomechanical properties at adjacent segments have not been discussed yet. Therefore, the purpose of this study is to investigate the biomechanical properties of modified cortical bone trajectory (MCBT) technique on adjacent segment degeneration (ASD) in transforaminal intradiscal lumbar disc fusion (TLIF) compare to traditional bone trajectory (TT) technique and cortical bone trajectory (CBT) technique. METHODS: The four human cadaveric lumbar specimens were provided by the anatomy teaching and research department of Xinjiang Medical University and four intact finite element models of the L1-S1 segment were generated. For each of these, three transforaminal lumbar interbody fusion procedures with three different fixation techniques were reconstructed at the L4-L5 segment, as follows: TT-TT (TT at both L4 and L5 segments), CBT-CBT (CBT at both L4 and L5 segments), MCBT-MCBT (MCBT at both L4 and L5 segments). The range of motion and von Mises stress of the intervertebral disc of the L3-L4 and L5-S1 segments were recorded with a 400N compressive load and 7.5 Nm moments in flexion, extension, left-right bending, and left-right rotation. RESULTS: The peak ROM of the L3-L4 segment in the MCBT-MCBT group was reduced by 10.5%, 6.1%, 12.2%, 4.1%, and 1.5% in flexion, extension, left-right bending, and left rotation compared to the TT-TT group and reduced by 1.8%, 5.5%, 10.0%, 12.8%, and 8.8% in flexion, left-right bending, and left-right rotation compared to the CBT-CBT group, respectively. The MCBT-MCBT group has the lowest peak ROM of the L3-L4 segment in flexion, left bending, and right rotation, the lowest peak ROM of the L5-S1 segment in extension and right rotation, and the lowest peak von Mises stress of the intervertebral disc at the L5-S1 segment in right rotation compared to the TT-TT and CBT-CBT group. In addition, the peak von Mises stress at the L3-L4 segment was lowest and more dispersed in all motions, the MCBT-MCBT group exhibited lower peak ROM of the L5-S1 segment in flexion, extension, and right rotation, and showed lower peak von Mises stress of the disc at the L5-S1 segment in flexion, extension, and right rotation compared with the TT-TT group. CONCLUSION: The modified cortical bone trajectory technique may have a beneficial effect on reducing the incidence of ASD in the L4-L5 TLIF model compared to the traditional bone trajectory technique and cortical bone trajectory technique.

The Influence of Titanium-coated Poryetheretherketone Cages in Fusion Status after Posterior Lumbar Interbody Fusion with Cortical Bone Trajectory Screw Fixation.

OBJECTIVE: Posterior lumbar interbody fusion (PLIF) with cortical bone trajectory (CBT) screw fixation (CBT-PLIF) shows potential for reducing adjacent segmental disease. Previously, our investigations revealed a relatively lower fusion rate with the use of carbon fiber-reinforced polyetheretherketone (CP) cages in CBT-PLIF compared with traditional pedicle screw fixation (PS-PLIF) using CP cages. This study aims to evaluate whether the implementation of titanium-coated polyetheretherketone (TP) cages can enhance fusion outcomes in CBT-PLIF. METHODS: A retrospective analysis was conducted on 68 consecutive patients who underwent CBT-PLIF with TP cages (TP group) and 89 patients who underwent CBT-PLIF with CP cages (CP group). Fusion status was assessed using computed tomography at 1 year postoperatively and dynamic plain radiographs at 2 years postoperatively. RESULTS: No statistically significant differences in fusion rates were observed at 1 and 2 years postoperatively between the TP group (86.8% and 89.7%, respectively) and the CP group (77.5% and 88.8%, respectively). Notably, the CP group exhibited a significant improvement in fusion rate from 1 to 2 years postoperatively (P = 0.002), while no significant improvement was observed in the TP group. CONCLUSIONS: Examination of temporal changes in fusion rates reveals that only the TP group achieved a peak fusion rate 1 year postoperatively. This implies that TP cages may enhance the fusion process even after CBT-PLIF. Nevertheless, the definitive efficacy of TP cages for CBT-PLIF remains uncertain in the context of overall fusion rates.

Multi-objective optimization of cortical bone grinding parameters based on particle swarm optimization.

Grinding is a fundamental operation in craniotomy. Suitable grinding parameters will not only reduce force damage, but also ensure grinding efficiency. In this study, the regression equations of material removal rate and grinding force were obtained based on the theory of cortical bone grinding and full factorial test results, a multi-objective optimization based on the particle swarm algorithm was proposed for optimizing the grinding parameters: spindle speed, feed speed, and grinding depth in the grinding process. Two conflicting objectives, minimum grinding force and maximum material removal rate, were optimized simultaneously. The results revealed that the optimal grinding parameter combination and optimization results were as follows: spindle speed of 5000 rpm, feed rate of 60 mm/min, grinding depth of 0.6 mm, grinding force of 15.1 N, and material removal rate of 113.8 mm3/min. The parameter optimization result can provide theoretical guidance for selecting cortical bone grinding parameters in actual craniotomy.

The silicone metacarpophalangeal joint arthroplasty: An in-vitro analysis.

BACKGROUND: Silicone is still the gold standard implant in metacarpophalangeal arthroplasty. Whereas the clinical results are acceptable, in follow-ups with >10 years, high rates of implant fracture are common, and 5 to 7% of implants required revision. This work's purpose is to analyse the hypothesis that the joint flexion amplitude has a relevant effect on bone strain level, implant stress and bone-implant micromotion, which can reflect an increase in the risk of bone resorption/fatigue failure, implant fracture and osteolysis. METHODS: To experimentally predict the cortical loading behaviour, composite metacarpals and proximal phalanges were used in intact and implanted states. A finite element model was developed to evaluate the structural behaviour of cancellous bone and implant. This model was validated by comparing cortical strain and load-displacement curve with experimental measurements. FINDINGS: Bone strain changes between the intact and the implanted states showed a load transfer effect from the cortical to the cancellous bone that increases significantly with the flexion's amplitude rise. The peak implant stress occurred in the flexion amplitudes further away from the implant neutral angle. The highest implant pistoning motion and the highest phalanx cancellous-bone strain occurred simultaneously at the maximum flexion amplitude. INTERPRETATION: Limiting joint flexion range will be helpful to reduce the strain-shielding effect on cortical bone, minimizing the overload effect on cancellous bone and decreasing the stress levels and the pistoning motion on the implant, ultimately contributing to the longevity of silicone arthroplasty.

The accuracy of cortical bone trajectory screw placement guided by spinous process clamp hardware in lumbar spinal surgery: a retrospective study.

This study aimed to assess the accuracy of cortical bone trajectory (CBT) screws placement guided by a spinous process clamp (SPC) guide. A total of 32 patients who received single-level midline lumbar fusion (MIDLF) surgery between June 2019 and January 2020 were retrospectively analyzed and divided into free-hand (FH) and SPC-guided groups according to the surgical approach. In the FH group, CBT screws was implanted with the assistance of fluoroscopy, while in the SPC group, CBT screws was implanted using the SPC navigator hardwire. A total of 128 screws were assessed in this study, with higher rates of clinically acceptable screw placement (grades A and B) and grade A screws in the SPC group than in the FH guide group (92.2% vs. 79.7%, P = 0.042 and 54.7% vs. 35.9%, P = 0.033, respectively). Misplacement screws (grades C, D, and E) occurred more often in the FH group than in the SPC guide group (20.3% vs. 7.8%, P = 0.042). The incidence of proximal facet joint violation (FJV) was higher in the FH group than in the SPC group (15.6% vs. 3.1%, P = 0.030). The radiation dose and time in the SPC guide group were comparable to those in the FH group (P = 0.063 and P = 0.078). The average operative time was significantly longer in the SPC guide group than in the FH group (267.8 ± 45.5 min vs. 210.9 ± 44.5 min, P = 0.001). Other clinical parameters, such as the average bone mineral density (BMD), intraoperative blood loss, and postoperative hospital stay, were not significantly different. Oswestry disability index (ODI) and back pain visual analogue scale (VAS) scores were significantly improved in both groups compared with preoperatively. SPC guided screw placement was more accurate than the fluoroscopy-assisted FH technique for single-level MIDLF at L4/5. Patients undergoing SPC-guided screw placement can achieve similar clinical outcomes as the fluoroscopy-assisted FH technique.

Biomechanical investigation of the hybrid lumbar fixation technique with traditional and cortical bone trajectories in transforaminal lumbar interbody fusion: finite element analysis.

OBJECTIVE: To compare the biomechanical performance of the hybrid lumbar fixation technique with the traditional and cortical bone trajectory techniques using the finite element method. METHODS: Four adult wet lumbar spine specimens were provided by the Department of Anatomy and Research of Xinjiang Medical University, and four L1-S1 lumbar spine with transforaminal lumbar interbody fusion (TLIF) models at L4-L5 segment and four different fixation techniques were established: bilateral traditional trajectory screw fixation (TT-TT), bilateral cortical bone trajectory screw fixation (CBT-CBT), hybrid CBT-TT (CBT screws at L4 and TT screws at L5) and TT-CBT (TT screws at L4 and CBT screws at L5). The range of motion (ROM) of the L4-L5 segment, von Mises stress of cage, internal fixation, and rod were compared in flexion, extension, left and right bending, and left and right rotation. RESULTS: Compared with the TT-TT group, the TT-CBT group exhibited lower ROM of L4-L5 segment, especially in left-sided bending; the CBT-TT group had the lowest ROM of L4-L5 segment in flexion and extension among the four fixation methods. Compared with the CBT-CBT group, the peak cage stress in the TT-CBT group was reduced by 9.9%, 18.1%, 21.5%, 23.3%, and 26.1% in flexion, left bending, right bending, left rotation, and right rotation conditions, respectively, but not statistically significant (P > 0.05). The peak stress of the internal fixation system in the TT-CBT group was significantly lower than the other three fixation methods in all five conditions except for extension, with a statistically significant difference between the CBT-TT and TT-CBT groups in the left rotation condition (P = 0.017). In addition, compared with the CBT-CBT group, the peak stress of the rod in the CBT-TT group decreased by 34.8%, 32.1%, 28.2%, 29.3%, and 43.0% under the six working conditions of flexion, extension, left bending, left rotation, and right rotation, respectively, but not statistically significant (P > 0.05). CONCLUSIONS: Compared with the TT-TT and CBT-CBT fixation methods in TLIF, the hybrid lumbar fixation CBT-TT and TT-CBT techniques increase the biomechanical stability of the internal fixation structure of the lumbar fusion segment to a certain extent and provide a corresponding theoretical basis for further development in the clinic.

Postoperative evaluation of bone bridge after alveolar bone graft with cortical bone lining technique.

OBJECTIVE: For alveolar bone grafting (ABG), we have been performing surgery using a technique in which a cortical bone lining iliac endplate is applied to the anterior nasal aperture inferior margin. Herein, we used conventional and cortical bone lining techniques to examine the postoperative bone-bridge morphology after ABG. STUDY DESIGN: Fifty-five unilateral patients who underwent ABG at our clinic from October 2012 to March 2019 were included. We used postoperative CT data to compare the labiolingual width of the grafted bone and anterior-posterior and vertical shapes of the nasal aperture inferior margin with respect to the ungrafted side. RESULTS: The cortical bone lining technique was superior to the conventional method. The cortical bone lining technique showed good results regardless of alveolar cleft width or oral-nasal fistula. Also, tooth movement into the grafted area was involved in maintaining the residual graft bone; however, the cortical bone lining technique had better results. CONCLUSIONS: The cortical bone lining technique allows for the physical closure of nasolateral mucosal fistulas when it is technically difficult, and it can apply sufficient pressure to the bone marrow cancellous bone filling over the cortical plate bone. Our results illustrate the effectiveness of the cortical bone lining technique.

The effect of the cortical bone trajectory screw fixation and traditional pedicle screw fixation on surgical site wound infection in posterior lumbar fusion wound: A meta-analysis.

A meta-analysis investigation was performed to measure the influence of cortical bone trajectory screw fixation (CBTSF) and traditional pedicle screw fixation (TPSF) on surgical site wound infection (SSWI) in posterior lumbar fusion (PLF). A comprehensive literature inspection till February 2023 was applied and 1657 interrelated investigations were reviewed. The 13 chosen investigations enclosed 1195 individuals with PLF in the chosen investigations' starting point, 578 of them were using CBTSF, and 617 were using TPSF. Odds ratio (OR) in addition to 95% confidence intervals (CIs) were utilised to compute the value of the effect of the CBTSF and TPSF on SSWI in PLF by the dichotomous approaches and a fixed or random model. No significant difference was found between individuals using CBTSF and TPSF in SSWI (OR, 0.68; 95% CI, 0.35-1.33, P = .26), superficial SSWI (OR, 0.62; 95% CI, 0.22-1.79, P = .38), and deep SSWI (OR, 0.30; 95% CI, 0.06-1.50, P = .14) in PLF. No significant difference was found between individuals using CBTSF and TPSF in SSWI, superficial SSWI, and deep SSWI in PLF. However, care must be exercised when dealing with its values because of the small sample sizes of several chosen investigations for this meta-analysis and the low number of selected investigations for a certain type of SSWI.

Biomechanical comparative study of midline cortical vs. traditional pedicle screw trajectory in osteoporotic bone.

INTRODUCTION: In lumbar spinal stabilization pedicle screws are used as standard. However, especially in osteoporosis, screw anchorage is a problem. Cortical bone trajectory (CBT) is an alternative technique designed to increase stability without the use of cement. In this regard, comparative studies showed biomechanical superiority of the MC (midline cortical bone trajectory) technique with longer cortical progression over the CBT technique. The aim of this biomechanical study was to comparatively investigate the MC technique against the not cemented pedicle screws (TT) in terms of their pullout forces and anchorage properties during sagittal cyclic loading according to the ASTM F1717 test. METHODS: Five cadavers (L1 to L5), whose mean age was 83.3 ± 9.9 years and mean T Score of -3.92 ± 0.38, were dissected and the vertebral bodies embedded in polyurethane casting resin. Then, one screw was randomly inserted into each vertebra using a template according to the MC technique and a second one was inserted by freehand technique with traditional trajectory (TT). The screws were quasi-static extracted from vertebrae L1 and L3, while for L2, L4 and L5 they were first tested dynamically according to ASTM standard F1717 (10,000 cycles at 1 Hz between 10 and 110 N) and then quasi-static extracted. In order to determine possible screw loosening, there movements were recorded during the dynamic tests using an optical measurement system. RESULTS: The pull-out tests show a higher pull-out strength for the MC technique of 555.4 ± 237.0 N compared to the TT technique 448.8 ± 303.2 N. During the dynamic tests (L2, L4, L5), 8 out of the 15 TT screws became loose before completing 10,000 cycles. In contrast, all 15 MC screws did not exceed the termination criterion and were thus able to complete the full test procedure. For the runners, the optical measurement showed greater relative movement of the TT variant compared to the MC variant. The pull-out tests also revealed that the MC variant had a higher pull-out strength, measuring at766.7 ± 385.4 N, while the TT variant measured 637.4 ± 435.6 N. CONCLUSION: The highest pullout forces were achieved by the MC technique. The main difference between the techniques was observed in the dynamic measurements, where the MC technique exhibited superior primary stability compared to the conventional technique in terms of primary stability. Overall, the MC technique in combination with template-guided insertion represents the best alternative for anchoring screws in osteoporotic bone without cement.

Safety and Efficacy of Cortical Bone Trajectory Screw Fixation Combined with Facet Fusion for the Treatment of Lumbar Degenerative Disease.

OBJECTIVE: The mainstream lumbar fusion surgeries have various shortcomings, such as complex operation, much invasion, and loss of lumbar function. How to minimize the surgical injury and to achieve better therapeutic effects has become the goal pursued by spine surgeons. This study introduces a cortical bone trajectory (CBT) screw fixation combined with facet fusion (FF), evaluates its safety and efficacy, and explores its advantages, in order to provide a reference for treatment of patients with single-level lumbar stenosis or grade I degenerative spondylolisthesis. METHODS: We retrospectively analyzed the clinical, radiological, and operative data of 167 patients with single-level lumbar stenosis or grade I degenerative spondylolisthesis who underwent FF or transforaminal lumbar interbody fusion (TLIF) from January 2013 to September 2019 in the spine surgery department of the Second Hospital of Shandong University. Patients were divided into four groups according to surgical method: group CBT-FF, CBT screw combined with FF; group PS-FF, pedicle screw (PS) combined with FF; group CBT-TLIF, CBT screw combined with TLIF; and group PS-TLIF, PS combined with TLIF. The operation time, estimated intraoperative blood loss, complications after surgery, visual analog scale (VAS), and Oswestry disability index (ODI) of the four groups were compared. The fusion was evaluated by anteroposterior and lateral X-ray, CT scan, and three-dimensional reconstruction. RESULTS: Twelve months after surgery, the fusion rate of four groups had no significantly statistical differences (p = 0.914). VAS and ODI scores were lower after surgery than before. Low back pain VAS scores 1 week after surgery in group CBT-FF and group CBT-TLIF were significantly lower than those in group PS-FF and group PS-TLIF (pCF/PF = 0.001, pCF/PT = 0.000, pPF/CT = 0.049, pCT/PT = 0.000). Low back pain VAS score 3 months after surgery was significantly lower in group CBT-FF than group PS-FF and group PS-TLIF (pCF/PF = 0.045, pCF/PT = 0.008). ODI score 1 week after surgery was significantly lower in group CBT-FF than group PS-FF, group CBT-TLIF, and group PS-TLIF (pCF/PF = 0.000, pCF/CT = 0.005, pCF/PT = 0.000, pCT/PT = 0.015). ODI score 3 months after surgery was significantly lower in group CBT-FF than group PS-FF, group CBT-TLIF, and group PS-TLIF (pCF/PF = 0.001, pCF/CT = 0.002, pCF/PT = 0.000). Incidence of complications did not significantly differ among the groups. CONCLUSION: CBT screw fixation combined with FF is a safe and efficacious procedure for patients with single-level lumbar stenosis or grade I degenerative spondylolisthesis. This minimally invasive approach of lumbar fusion can be simply and easily performed. Patients who undergo CBT screw fixation combined with FF recovered faster than TLIF.

Complication, fusion, and revision rate in the lumbar cortical bone trajectory and pedicle screw fixation techniques: a systematic review and meta-analysis.

BACKGROUND: To obtain the complication rate, fusion rate, and revision rate of the lumbar cortical bone trajectory technique and pedicle screw fixation technique in lumbar interbody fusion surgery by single-arm meta-analysis and lay a basis for orthopedic surgeons to select the fixation techniques and perioperative management. METHODS: PubMed, Ovid Medline, Web of Science, CNKI, and Wanfang databases were searched comprehensively. Data extraction, content analysis, and quality assessment of the literature were performed by two independent reviewers according to the Cochrane Collaboration guidelines using R and STATA software for single-arm meta-analysis. RESULTS: The total complication rate of the lumbar cortical bone trajectory technique was 6%, including a hardware complication rate of 2%, ASD (adjacent segment degeneration) rate of 1%, wound infection rate of 1%, dural damage rate of 1%, hematoma rate tending to 0%, fusion rate of 94%, and revision rate of 1%. Lumbar pedicle screw fixation techniques had a total complication rate of 9%, with a hardware complication rate of 2%, ASD rate of 3%, wound infection rate of 2%, dural damage rate of 1%, hematoma rate tending to 0%, fusion rate of 94%, and revision rate of 5%. This study was registered with PROSPERO, CRD42022354550. CONCLUSION: Lumbar cortical bone trajectory was associated with a lower total complication rate, ASD rate, wound infection rate, and revision rate than pedicle screw fixation. The cortical bone trajectory technique reduces the incidence of intraoperative and postoperative complications and can be an alternative in lumbar interbody fusion surgery.

The Fusion Rate of Cortical Bone Trajectory Screw Fixation and Pedicle Screw Fixations in L4-5 Interbody Fusion: A Retrospective Cohort Study.

OBJECTIVE: Although cortical bone trajectory (CBT) screw fixation has been used for several years, the number of studies on its fusion effects is limited. Furthermore, several studies report conflicting outcomes. We aimed to compare the fusion rates and clinical efficacy of CBT screw fixation and pedicle screw (PS) fixation for L4-L5 interbody fusion. METHODS: This study was a retrospective cohort control study. Patients with lumbar degenerative disease who underwent L4-L5 oblique lumbar interbody fusion (OLIF) or posterior decompression using CBT screws between February 2016 and February 2019 were included. Patients in whom PS was used were matched for age, sex, height, weight, and BMI. Record the operation time, blood loss. All enrolled patients underwent lumbar CT imaging at one-year follow-up to evaluate the fusion rate. At the two-year follow-up the visual analogue scale (VAS), Oswestry disability index (ODI), and Japanese Orthopaedic Association scores (JOA) were used to identify symptom improvement. Independent t-test was used for the comparison, and score data were analyzed using the χ2 and exact probability tests. RESULTS: A total of 144 patients with were included. All patients were followed-up postoperatively for 25-36 months (average 32.42 ± 10.55 months). Twenty-eight patients underwent OLIF and CBT screw fixation, 36 underwent OLIF and PS fixation, 32 underwent posterior decompression and CBT screw fixation, and 48 underwent posterior decompression and PS fixation. The fusion rates following CBT screw and PS fixations in OLIF were 92.86% (26/28) and 91.67% (33/36), respectively (P = 1). The fusion rates following CBT screw and PS fixations in posterior decompression were 93.75% (30/32) and 93.75% (45/48), respectively (P > 0.05). Regardless of OLIF or posterior decompression, there were no significant differences in the VAS, ODI, and JOA scores between patients treated with CBT and PS (P > 0.05). CONCLUSION: CBT screw fixation can achieve a satisfactory interbody fusion rate with a clinical efficacy similar to that of PS in patients with lumbar degenerative disease, regardless of whether OLIF or posterior decompression was performed.

Hybrid pedicle screw and modified cortical bone trajectory technique in transforaminal lumbar interbody fusion at L4-L5 segment: finite element analysis.

BACKGROUND: Investigate the biomechanical properties of the hybrid fixation technique with bilateral pedicle screw (BPS) and bilateral modified cortical bone trajectory screw (BMCS) in L4-L5 transforaminal lumbar interbody fusion (TLIF). METHODS:  Three finite element (FE) models of the L1-S1 lumbar spine were established according to the three human cadaveric lumbar specimens. BPS-BMCS (BPS at L4 and BMCS at L5), BMCS-BPS (BMCS at L4 and BPS at L5), BPS-BPS (BPS at L4 and L5), and BMCS-BMCS (BMCS at L4 and L5) were implanted into the L4-L5 segment of each FE model. The range of motion (ROM) of the L4-L5 segment, von Mises stress of the fixation, intervertebral cage, and rod were compared under a 400-N compressive load with 7.5 Nm moments in flexion, extension, bending, and rotation. RESULTS:  BPS-BMCS technique has the lowest ROM in extension and rotation, and BMCS-BMCS technique has the lowest ROM in flexion and lateral bending. The BMCS-BMCS technique showed maximal cage stress in flexion and lateral bending, and the BPS-BPS technique in extension and rotation. Compared to the BPS-BPS and BMCS-BMCS technique, BPS-BMCS technique presented a lower risk of screw breakage and BMCS-BPS technique presented a lower risk of rod breakage. CONCLUSION:  The results of this study support that the use of the BPS-BMCS and BMCS-BPS techniques in TLIF surgery for offering the superior stability and a lower risk of cage subsidence and instrument-related complication.

A Comparison Between Cortical Bone Trajectory Screws And Traditional Pedicle Screws in Patients With Single-Level Lumbar Degenerative Spondylolisthesis: Five-Year Results.

STUDY DESIGN: A retrospective observational study. OBJECTIVE: This study investigated the clinical and radiological results of using cortical bone trajectory (CBT) screws versus traditional pedicle (TP) screws in transforaminal lumbar interbody fusion (TLIF) during a five-year follow-up of patients with single-level lumbar degenerative spondylolisthesis. SUMMARY OF BACKGROUND DATA: Few studies have compared five-year follow-up outcomes between CBT screws and TP screws in TLIF. MATERIALS AND METHODS: We reviewed outcome data of patients with single-level lumbar degenerative spondylolisthesis who underwent TLIF procedures with CBT screws (131 patients) or TP screws (80 patients) between 2011 and 2015. Patient-reported clinical outcome data included Oswestry disability index scores and visual analog scale (VAS) scores for back and leg pain at baseline, six months, and one year, two years, and five years postoperatively. The radiographic fusion rate and prevalence of secondary surgery for adjacent segment disease were also measured. RESULTS: During the follow-up over five years, the CBT group had significantly lower VAS scores for back pain ( P <0.0001, respectively). At two years after surgery, the CBT group had significantly higher VAS scores for leg pain ( P =0.007). At five years postoperatively, no significant differences existed in the VAS score for leg pain or in the Oswestry disability index score between the two groups. Radiographic fusion rates (CBT vs. TP: 95.5% vs. 95.9%; P =0.881) and adverse events during the five years after surgery were not significantly different. At two years postoperatively, the prevalence of secondary surgery to treat adjacent segment disease was significantly different between the two groups (CBT vs . TP: 13.7% vs. 5.0%; P =0.044). CONCLUSIONS: Our results suggest that, during a five-year followup, CBT screws for TLIF were an effective treatment compared to TP screws in the setting of single-level lumbar degenerative spondylolisthesis. However, when using CBT screws for TLIF, surgeons should consider the higher rate of secondary procedures to treat symptomatic adjacent segment disease.

Thermomechanical damage in cortical bone caused by margins of surgical drill bit: A finite element analysis.

BACKGROUND AND OBJECTIVE: Conventional surgical drill bits suffer from several drawbacks, including extreme heat generation, breakage, jam, and undesired breakthrough. Understanding the impacts of drill margin on bone damage can provide insights that lay the foundation for improvement in the existing surgical drill bit. However, research on drill margins in bone drilling is lacking. This work assesses the influences of margin height and width on thermomechanical damage in bone drilling. METHODS: Thermomechanical damage-maximum bone temperature, osteonecrosis diameter, osteonecrosis depth, maximum thrust force, and torque-were calculated using the finite element method under various margin heights (0.05-0.25 mm) and widths (0.02-0.26 mm). The simulation results were validated with experimental tests and previous research data. RESULTS: The effect of margin height in increasing the maximum bone temperature, osteonecrosis diameter, and depth were at least 19.1%, 41.9%, and 59.6%, respectively. The thrust force and torque are highly sensitive to margin height. A higher margin height (0.21-0.25 mm) reduced the thrust force by 54.0% but increased drilling torque by 142.2%. The bone temperature, osteonecrosis diameter, and depth were 16.5%, 56.5%, and 81.4% lower, respectively, with increasing margin width. The minimum thrust force (11.1 N) and torque (41.9 Nmm) were produced with the highest margin width (0.26 mm). The margin height of 0.05-0.13 mm and a margin width of 0.22-0.26 produced the highest sum of weightage. CONCLUSIONS: A surgical drill bit with a margin height of 0.05-0.13 mm and a margin width of 0.22-0.26 mm can produce minimum thermomechanical damage in cortical bone drilling. The insights regarding the suitable ranges for margin height and width from this study could be adopted in future research devoted to optimizing the margin of the existing surgical drill bit.